Do you have a gym floor with finish problems? Gym Floor Inspectors is here to help.
Finishing problems are almost always due to installer error. When there isn’t proper preparation between coats and sealers, the finish will likely peel, leaving the owner with a useless gym floor. Manufacturers give specific direction when it comes to sealers and finishing coats. When these specific instructions are not followed, finishing problems occur.
Preventing finishing issues is relatively simple. When finishing coats and sealers are prepared in the right way, and applied at the correct timing, the results are a preeminent finish on a floor that should last a very long time. If the contractor installing your floor follows the manufacturer’s finishing instructions and pays proper attention to the preparation of finishing coats, you should have no problems or issues with the finishing on your maple sports floor.
Gym Floor Inspectors will walk with you through the entire installation process of your gym floor, overseeing the work to ensure that there will be no finishing issues with your maple sports floor. If your installed gym floor already has a major issue finish issue, then Gym Floor Inspectors will work with you on getting the floor replaced.
7620 E. Via del Placito Scottsdale, AZ. 85258